Land Pride RGA1282
Double tap to zoom
RGA12 & RGR12 Series Gear Drive Rotary Tillers RGA1282
Land Pride is expanding our popular line of 3-point Rotary Tillers with the addition of two gear drive models -- the RGA1242, RGA1250, RGA1258, RGA1266, RGA1274, RGA1282 forward rotation and RGR1242, RGR1250, RGR1258, RGR1266, RGR1274, RGR1282 reverse rotation. These American-made tillers feature Cat. 1 hitch, plate steel A-frame and 540 RPM gearbox. Both models include a 17" diameter rotor, 6 "C" shaped tines per flange, and a 7" tilling depth. The rotor is powered by a spur-gear drive in an oil bath with a heavy stamped drive cover. - Less
Land Pride is expanding our popular line of 3-point Rotary Tillers with the addition of two gear drive models -- the RGA1242, RGA1250, RGA1258, RGA1266, RGA1274, RGA1282 forward rotation and RGR1242, RGR1250, RGR1258, RGR1266, RGR1274, RGR1282 reverse rotation. These American-made tillers feature Cat. 1 hitch, plate st... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
Features | Benefits |
American made | American made means better quality & parts availability. Most tillers are imported. |
Tractor hp range 42" & 50" 58" & 66" 74" 82" |
18-60 hp 23-60 hp 30-60 hp 35-60 hp |
Reverse tilling action (RGR only) | Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can. |
3 Year limited gearbox warranty | 3 Years on housings, seals, bearings. Shows our confidence in the product. |
42", 50", 58", 66", 74", & 82" Working widths |
A wide range of widths are available to meet specific customer needs. |
7" Tilling depth | For deep soil penetration. |
Formed plate steel upper hitch | Plate steel is stronger than flat bar type hitch. |
Fits Land Pride Quick Hitch | Allows for quick and easy one person hook-up. |
Park stand | Allows for easy hook-up and storage. |
Adjustable skid shoes | Control depth with seven adjustments |
Formed and reinforced rear deflector |
Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results. |
Front deflector (RGR only) | Front deflector is flexible to take the beating from rocks or debris. |
Bolt in rotor | Rotor removes and replaces easier for servicing. |
17" Rotor swing diameter | For deep tilling and turns the soil over faster. |
Six “C” shaped, heat-treated tines per flange |
“C” Shaped tines require less hp to move through the ground. Six tines per flange make for a better seedbed in less time than four tines. |
Double lip seal on rotor bearing | Double lip seal helps keep the dirt out and the grease in. |
Fully shielded slip-clutch driveline | Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins. |
Gear drive enclosed in oil bath |
Gear drive requires less maintenance than roller chain drive. Oil bath keeps wear to a minimum. |
Stamped gear case cover | Stamped forming gives the chain cover strength. |
Optional BX driveline | This driveline will fit B and BX Kubota tractors without cutting it to fit. Not quick hitch adaptable for B & BX Kubota tractors. |
Specifications
Model Number | RGA1282 |
Recommended tractor PTO hp | 35 to 60 hp |
Weight | 647 lbs. |
Working depth | 7 in. |
Working width | 82" |
Overall width | 87 1/8" |
3-Point hitch type | Category I, 3-point plate steel A-frame, Fits Land Pride Quick Hitch |
Driveline | Category 4 with Slip Clutch |
Optional BX driveline | Not Available |
Number of flanges on rotor | 10 |
Number of tines per flange | 6 |
Tine construction | Alloy steel heat-treated “C” shaped blades |
Rotor rotation | Forward rotation |
Rotor swing diameter | 17" |
Rotor shaft speed | 211 rpm at 540 rpm PTO |
Rotor bearing mount | Machined cast iron with ball bearings |
Skid shoes | Adjustable |
Park stand | Adjustable |
Rear deflector | Adjustable |
Front deflector | None (Not required with RGA forward rotation) |
Gearbox construction | 50 hp input at 540rpm 1.92:1 ratio, Cast iron housing with ASAE 1 3/8" - 6 spline shaft, tapered roller bearings, bevel gears, drain plug, level plug & fill plug |
Gearbox lubrication | 2 Pints of SAE 80-90W EP oil |
Drive end construction | Spur gears enclosed in an oil bath with oil level plug or sight glass and oil fill/breather plug |
Gear case lubrication | 6 Pints of SAE 80-90W EP oil |
Spur gears | Case hardened teeth |