Search Inventory    Search Products & Site

Land Pride RCR2510

Model RCR2510 for sale at Rusler Implement, Colorado

Double tap to zoom

 

Features

FEATURES BENEFITS
Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
 Tractor horsepower range  3-point (2596 Model = 50 - 110 hp) & (2510 Model = 60 - 110 hp)
Pull-type (2596 Model = 30 - 110 hp) & (2510 Model = 50 - 110 hp)
540 or 1000 rpm  
Gearbox HP rating 120 Horsepower on splitter gearbox and 60 HP on outboard gearboxes.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Splined rubber flex- couplers
between the center and
outboard gearboxes
Protects the driveline and gearboxes from hard objects in the blade path.
Constant velocity u-Joint
option on RCR2510 &
RCRM2510 pull-type
Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection on main driveline Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
3-Point or Pull-type Pull-type fits older tractors without a top link or smaller tractors without enough lift capacity.
(RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3)
High productive cutting width RCR2596 cuts 8'-0" width.
RCR2510 & RCRM2510 cuts 9'-10" width.
Fully welded 10 Gauge deck Fully welded deck adds rigidity.
3/16" Sidewall thickness Protects sidewalls from thrown objects.
Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
Dual leveling rods on Pull-type Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber shield option Reduces flying debris.
Full length skids with replaceable shoes Adds reinforcement to side panels. Replaceable shoes allows for change before wearing through to weld-on piece.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1" x 4" Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2" x 4" Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
1.5" Diameter cutting capacity Aids in cutting small brush.
High Blade tip speed RCR2596 (540 rpm) = 14,792 FPM
RCR2510 (540 rpm) = 17,749 FPM                            Means cleaner cutting of material.
RCRM2510 (1000 rpm) = 18,035 FPM
Laminated tires Laminated tires can handle almost any condition.
Airplane tires (Pull-Type only) Airplane tires offer smooth roadability.
Fits Land Pride Quick Hitch Allows for quick and easy one person hook-up.

Specifications

Model RCR2510 (540 rpm)
RCRM2510 (1000 rpm)
Machine weight (With front and
rear chain shields)
Lift-type 1,750 lbs
Pull-type 2,035 lbs.
Hitch Lift-type Category 2 & 3
Quick-Hitch adaptable
Pull-type - w/dual level rods
Pull type tongue weight 872 lbs
Cutting width 9' - 10"
Overall width 10' - 3' 1/2"
Overall length Lift-type: 9' - 0"
Pull-type: 12' - 9 1/2"
Deck height 9 5/8"
Cutting height 2' - 10 1/2"
Cutting capacity 1 1/2"
Tractor power take-off
Hp rating
Lift-type: 60 - 110
Pull-type: 50 - 110
Gearbox horsepower rating Center - 100 hp Outboard 60 hp
Gearbox
(Speed up beveled gears)
540 rpm or 1000 rpm pto driven gearbox
Cast iron housing, beveled gears
Gearbox lubrication 80-90w EP
Gearbox oil capacity End boxes
T-box
2.5 Pints
4.5 Pints
Gear box Input/ output shaft size Input shaft = 1 3/4" - 20 spline
Output shaft = 2" dia.
Deck material thickness 10 Gauge
Skids Replaceable
Stump jumper Round pan 3/16"
Blades (2) 1/2" x 4" Heat treated
Free-swinging suction blades
Blade bolts Keyed with harden flat washer and lock nu
Blade tip speed 540 rpm 17,749 fpm
1000 rpm 18,035 fpm
Driveline Cat 4 w/equal angle u-joint or
Constant velocity u-joint
Driveline protection 540 rpm - 4 plate slip clutch
1000 rpm - 2 plate slip clutch
Tailwheel option
Lift-type (2 ea.)
Pull-type (2 ea.)
4" x 8" x 15 1/4" Laminated
6" x 9" x 21" Laminated or 24" recap aircraft tires
Optional safety shields Front & rear chain/ front & rear rubber