Search Inventory
Search Products & Site
Land Pride RCR1548
Double tap to zoom
RCR15 Series Rotary Cutters RCR1548
For small acreage owners looking for a heavier cutter, Land Pride offers the RCR1548. It features a 2" cutting capacity, a high blade tip speed, and larger gearbox than the RCR12. Ideal for maintenance of lanes, pastures, and other rough-cut areas.
Get a Quote »
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send to a friend »
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
FEATURES | BENEFITS |
Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
Cat. 3 driveline with shear- bolt | Shear bolt offers maximum driveline protection. |
Cat. 3 driveline with 2-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
Floating top link | Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors. |
Fully welded deck | Robotic welded. Adds additional strength. |
Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
Cutting Height | 1" - 9" cutting height for wide range of cutting conditions. |
Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
1/2” x 3” Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper | Allows cutter to slide over obstructions protecting the gearbox output shaft. |
High blade tip speed | Ensures clean cut. 42" = 11,459 fpm 48" = 13,090 fpm |
Laminated tailwheel | Laminated material is long lasting in rough conditions. |
Solid rubber tailwheel | Can’t go flat. |
Heavy-duty spindle on tailwheel | Tailwheels take a beating, 1 1/4” spindle gives the strength to protect tailwheel assembly. |
Guarding | Protect against flying debris. Customer can choose to include rubber on the front and rear. |
Driveline holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
Model | RDR1548 |
Implement weight (with front guard) |
424 lbs. |
Hitch | Category 1 & Category 1 limited, Quick Hitch ready |
Cutting Width | 47 1/2" |
Overall Width | 53 1/2" |
Overall length Iincluding tailwheel) |
91 3/4" |
Deck height (Bottom of deck to bottom of skid shoe) |
7 1/4" |
Cutting height | 1 3/4" - 11 1/2" |
Cutting capacity | 2" (Grass, weeds & light brush) |
Recommended tractor hp | 20-50 HP |
Power take-off speed | 540 RPM |
Gearbox hp rating | 50 HP |
Gearbox with speed up beveled gears | 540 input rpm gearbox 1:1.93 Cast iron housing |
Gearbox oil capacity & lubrication | 4.5 Pints of gear lube 80-90w EP |
Deck construction | One piece reinforced deck |
Deck material thickness | 12 Gauge |
Skids shoes | 1/4" X 2" Weld-on |
Stump jumper | Round pan 10 ga. x 24" |
Blades (2) | 1/2" x 3" Heat treated alloy steel Free-swinging blades |
Blade bolts | Keyed with harden flat washer and lock nut |
Blade tip speed | 13,090 fpm |
Drive-line | ASAE Category 3 |
Drive-line protection | Standard 1/2" center shearbolt protection Optional - Center bolt 2 plate slip clutch |
Tailwheel | 4" x 16" Solid rubber tire |
Safety guards (Optional) | Rubber (front and rear) |
Featured New Products