Search Inventory
Search Products & Site
Land Pride RC(L)4710
![Model RC(L)4710 for sale at Rusler Implement, Colorado Model RC(L)4710 for sale at Rusler Implement, Colorado](/assets/Uploads/landpride-rc-l-4710-2.jpg)
Features
Features | Benefits |
Surpassed rugged industry standards | All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures according to ISO 4254-13. |
Factory assembled | Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit. |
7 Year gearbox warranty | Shows confidence in gearbox integrity. |
Rugged heavy built gearboxes | Capable of handling heavy cutting applications. |
Gearbox seal protection | Gearbox bottom seal protection for longer bearing life. |
Sliding guard for splitter gearbox | Sliding guard offers protection and easy access for improved efficiency of splitter gearbox maintenance. |
2 Piece drive-line shields | Drive-line grease zerks are easier to access. |
Low hitch weight on tractor tongue | Ideal for smaller hp tractors by reducing the amount of weight on the drawbar. |
Narrow A-frame hitch | Allows for a tighter turning radius. |
Adjustable park jack angle | Park jack can be adjusted to be perpendicular to the ground. |
Adjustable drive-line hanger | Serves as support rest for the drive-line when the cutter is unhooked from the tractor. Assist operator when attaching drive-line to tractor power take-off shaft. |
Input drive-line: Cat. 6 CV | Drive-line is matched just right for tractor capacity. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the drive-line. |
Drive-lines with slip-clutches: Cat. 4 intermediate Cat. 4 or Cat. 5 wing |
Drive-line is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to drive-line profiles. |
Grease zerks on end caps of drive-line | Intermediate and wing drive-line cross journals are easier to grease. |
High blade tip speed | Allows clean cutting of material. |
6" Blade overlap | Eliminates skipping during turns. |
Diamond blade bar | Provides the critical strength needed for consistent, top performance. |
3/16" Round stump jumper | Standard thick stump jumper material keeps damage to a minimum. |
Smooth top design | Reduces accumulation of debris and is easier and faster to clean. |
Tops of decks are 100% welded | Makes center deck and wing deck stronger. |
1/4" Sidewall thickness | Increased thickness reduces damage from objects being thrown into deck sidewalls. |
Multiple center skid shoe locations | Run two or four skid shoes in locations under the tongue pivots or out at the wing hinges. |
Beveled skid shoes on wing and weight box | Reduces gouging the ground when turning. |
LED signal lights | LED lights are bright, long lasting, and resist vibration, unlike incandescent lights. |
Hinged wing sections | Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting. |
1" Solid hinge rods | Larger diameter hinge rod provides greater strength in the hinge area. |
Wing transport lock pin | Transport lock pin will hold wing in folded position in the event of hydraulic loss. |
Enclosed dual 1" leveling rods | Cutter pulls equally on the rear axle while traveling over rough terrain. |
5-Bolt hubs | 5-Bolt hubs makes the wheel assembly more durable and longer lasting. |
Drain holes in wheel rims | Allows water to drain from wheels mounted on folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims. |
Spring cushioned center-axle | Protects unit from bumps and ground shock. |
Optional spring cushioned wing-axle | Further improves ride over a multitude of terrains. |
Replaceable individual wheel spindles | Spindles can be replaced when damaged without replacing entire axle assembly. |
Wheel options | Laminated tires: Eliminates flats. Air-filled tires: Give better cushion while transporting. Foam-filled tires: Give better cushion while transporting and can't go flat. |
LP Performance hitch option | Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar up to 12 degrees in both left and right directions. |
Bar-tite hitch option | Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear. |
Maintenance free tongue & axle pivots | Self lubricating journal bearings make for less maintenance. |
Color coded hydraulic hose handles | Easy hose identification & sturdy handle to easily connect & disconnect from tractor. |
4 lip, metal backed wheel hub seal with purging capabilities | Seals make it harder for water & debris to enter the hub and grease to leave the hub. Metal backing prevents sticks and twine from destroying the seal lips. |
Greasable cast steel, continuous hinges | Cast steel hinges make a strong connection & are easy to lubricate. |
Center axle options | Single suspension center axle: Spring cushion at the cylinder for cushion with least amount of moving parts. Independent suspension center axle: Offers additional suspension support per wheel axle. Walking tandem center axle: Designed for versatility over a multitude of terrains. Parallel pivot center axis: provides unmatched ground contact for hill-like terrains. |
Wing axle option | Solid wing axle: One piece wing axle that attains support from cylinder spring cushion on center axle. Independent suspension wing axle: Offers additional suspension support on wing axle. |
Dual-acting fold cylinders (optional) | Allows for a narrow transport width of 7'3" (2.21 m). |
Stroke control flip spacers | Easily change cut height with a flip of a spacer. |
Specifications
Model | RC(L)4710 & RCM(L)4710 Models |
Horsepower range | 50 - 250 hp (37.3 - 186.4 kW) |
Gearbox horsepower | 540 rpm or 1000 rpm 250 hp (186.4 kW) Divider and 210 hp (156.6 kW) Center & Wing |
Gearbox lubrication | Gear Lube 80-90W EP |
Gearbox oil capacity | Splitter: 3.5 pints (1.66 L); Center deck & Wing: 6 pints (2.84 L) |
Cutting capacity | 4" (10.2 cm) |
Machine weight Total weight Tongue weight |
5,160 lbs (2340.5 kg) 1,948 lbs (883.6 kg) |
Blade tip speed At 540 rpm At 1000 rpm |
Center Blades & Wing Blades = 16,300 FPM (82.8 mps) Center Blades = 16,300 FPM (82.8 mps) & Wing Blades = 16,000 FPM (81.3 mps) |
Hitch types | Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch. |
Hitch jack | Standard (7,000 lbs.) (3175.1 kg) |
Signal lights 7 Pin connector |
LED SAE J560 pin configuration |
Cutting width Overall width Transport width with 21" tires |
10'-0" (4.57 m) 11'-7" (4.83 m) 10'-3" (3.12 m) - Single-acting fold option, 7'-3" (2.21 m) - Dual-acting fold option. |
Overall length | 16'-3" (4.95 m) - With center deck raised fully up. |
Deck height | 12" (30.5 cm) |
Cutting height | 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option. |
Lift hydraulics | 3" x 8" (7.6 cm x 20.3 cm) hydraulic cylinder, hoses, fittings & stroke control spacers. |
Wing hydraulics | 2 1/2" x 12" (6.4 cm - 30.5 cm) hydraulic cylinder, hoses & fittings. |
Wing transport protection | Wing Transport Lock Pin |
Deck material thickness | 10 Gauge (3.4 mm) |
Side skirt thickness | 1/4" (6 mm) Steel |
Skid shoes | Wing Deck: 1 Replaceable skid shoe. Weight Box: 3 Replaceable skid shoes. Center Deck: 2 Replaceable skid shoes and multiple mounting locations. |
Blades - 6 (2 per carrier) | 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. |
Blade overlap | 6" (15.2 cm) |
Blade bolt | Keyed with hardened flat washer & lock-nut. |
Stump jumper / blade holder | 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar. |
Front & rear guards | Optional single row chain or dual row chain. |
Input drive-line 540 & 1000 rpm | Cat. 6 with constant velocity u-joint with or without overrunning clutch. |
Intermediate drive-line | Standard - Category 4 with slip-clutch. |
Wing drive-lines | Standard - Category 4 with slip-clutch or Category 5 with slip-clutch. |
Wheel options | 21" (53.3 cm) or 26" (66 cm) Laminated tires 24" (61 cm) Used aircraft, foam filled tires 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic 29" (73.7 cm) Used aircraft tires |
Number of wheels | 5 - Wheel option: Four on transport axle and one on wing axle. 6 - Wheel option: Four on transport axle and two on wing axle. |
Transport axle | Many configurations to choose from. |
Hubs | Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts. |
LP Performance hitch & Bar tite hitch pivot shaft diameter | 2 1/4" (5.7 cm) |
A-frame tongue | 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing |
Featured New Products