Search Inventory    Search Products & Site

Land Pride FDR1672

Model FDR1672 for sale at Rusler Implement, Colorado

Double tap to zoom

 

Features

FEATURES BENEFITS
3 Cutting widths 48", 60", 72" Able to adapt to various size needs.
Rear discharge The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow around objects.
Deflectors Built-in to throw material down, as well as forcing thrown objects down.
Clevis type lower hitch points Allows for easy hook-up by being able to remove pins and back into clevises.
Floating 3-point Top and bottom hitch points float up and down which allows the mower to float over uneven terrain.
Roll formed front on deck 3/16" roll formed front deck edging for greater strength and impact resistance.
Frame-over-deck design Frames takes stress out of deck by supporting it.
3/16" Deck thickness Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.
Lower hitch points adjust in and out Accommodates many tractor configurations by adjusting in and out.
Hard rubber tires Hard rubber tires are sandwiched between the rim halves, bolted in and can't go flat. Roller bearings allow for a long life.
Heavy-duty Gauge wheel arms 1/4" Gauge wheel arms increases strength.
Non-aligned gauge wheels Rear wheels don't track behind the front wheels to reduce laying grass over.
High Blade Tip Speed 48" = 16,203 fpm
60" = 18,195 fpm                                               For cleaner cutting and better dispersion of clippings.
72" = 18,130 fpm
Choices of Blades Low, medium, high-lift, or mulching blades are available to match customer needs and specific applications.
Blade overlap 1" blade overlap assures no skipping in tight turns.
Heavy-duty roller bearings & 1 3/8" machined spindles Roller bearings for smooth running and quiet operation, 1 3/8" machined spindles for durability, balanced performance, and accuracy. Cast iron housings for added protection and durability.
Top greasing spindles Assures top bearing gets grease. No shields to remove.
Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.
Vacuum formed ABS belt guards No scratching, no rattling.
Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belt tension.
Top Hitch Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.
Driveline hanger For ease in hookup and storage of driveline. Keeps driveline off ground.
Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal increases
productivity. (Except 48")

Specifications

Model Numbers FDR1672
Maximum HP - Engine 40 HP
Cutting Width 72"
Overall Width 74 1/2"
Height 36"
Length 72"
Weight 619#
Cutting Height (1/2" increments) 3/4" - 5 1/4"
Deck Material Thickness 3/16"
Blade Tip Speed 18,130 FPM
Blade Construction -3 ea. 1/4" x 2 1/2" x 16 7/8"
Heat Treated Alloy Steel
Blade Options Standard Blades: Medium Lift 
Optional Blades: Low Lift, High Lift & Mulching
Blade Overlap 1 1/4"
Blade Spindles 1 3/8" dia., Cast Iron Greasable Hubs
Discharge Rear
Hitch Category l
Lower Hitch Floating Clevis with Plated Pins
Top Link Floating Clevis
Castered Gauge Wheels 3 1/4" x 10" Solid Rubber
Caster Wheel Spindle 1" Diameter with Nylon Bushing
Drive Train 540 RPM PTO
Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio
Spring Loaded Single V-Belt
Gearbox Oil Capacity & Type 2.5 Pints of 80-90W EP Gear Lube
Drive-line Heavy-Duty w/quick coupler, ASAE Cat 2
Front Roller Optional
Quick Hitch Compatible No