Search Inventory
Search Products & Site
Land Pride PD35
Double tap to zoom
PD35 Series Post Hole Diggers PD35
The Land Pride PD35 Series Post Hole Digger is designed to meet the industrial duty applications of landscapers, construction companies, nurseries, ranchers, and farmers. The PD35 is designed for Category 1 or 2 three-point attachment and offers a 48" auger length and 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips.
Get a Quote »
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send to a friend »
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
| FEATURES | BENEFITS |
| Cat. 1 or 2 Hitch | Fits a wider variety of tractors by fitting Cat. 1 & 2. |
| 2 7/8" Yoke | 3/16”+ Wall thickness for strength. |
| 3 1/2" Reinforced boom | 7/32” Wall tubing for strength. |
| Auger flighting | Constant thickness on 1/4" flighting vs. tapered. |
| Replaceable hardened steel points on auger |
Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. |
| 2” OUTPUT SHAFT | Fits most other auger manufacturers for users who don’t need a new auger. |
| 5 Year gearbox warranty | Shows our confidence in the gearbox integrity. |
| Cat. 3 driveline with shear-pin or optional radial pin clutch |
Protection against obstructions. Radial pin works like a ‘ratchet’ to continually put driving force on the auger in tough conditions. |
| Large selection of augers | Variety of Dirt Auger and Rock Auger sizes and styles to suit many applications. |
| Large selection of Bolt-on Rock Heads (accessory) |
All sizes of Land Pride PD25 and PD35 Pengo Dirt Augers can be converted to Rock Augers with this accessory. |
| Alignment handle (optional) | Guide the auger from the tractor seat. |
| Down pressure kit (optional) | Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground. |
| Post Hole Digger stand (optional) |
Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. |
Specifications
| Model | PD35 |
| Tractor HP Range | 30 to 75 HP |
| Weight Without Auger | 233 lbs |
| Auger Length | 48" |
| Auger Flight Thickness | 1/4" |
| Auger Pipe | 2 1/2" ID |
| Auger Teeth | Forged, Individually Replaceable; 40 Degree angle installed on flat side; 50 Degree angle installed on angled side |
| Number of Teeth | (6" - 2 teeth) (9" & 12" - 4 teeth) (15" - 5 teeth) (18" - 6 teeth) (24" - 8 teeth) |
| Pilot | Cast Steel, 3 Drill points |
| Driveline Cat. | Cat. III Shear bolt - Standard; Cat. III Radial pin clutch - Optional (Recommended on Auger Sizes 15" and above.) |
| Maximum Operating PTO Speed | 300 RPM |
| Gearbox | 1 3/8" 6B spline input shaft, 4:1 Ratio |
| Gearbox Oil Capacity & Type | 9.1 Pints of SAE80-90W EP oil |
| Output Shaft | 2 O.D. Round |
| 3-Point Hitch Cat. | Cat. I & II |
| Boom | 3 1/2" O.D |
| Yoke | 2 7/8" O.D. |
Featured New Products
