Search Inventory    Search Products & Site

Land Pride SRT62

Model SRT62 for sale at Rusler Implement, Colorado

Double tap to zoom



Features Benefits
6" Offset capability Offset allows operator to till closer to fences, buildings, sidewalks, and other objects.
Hook skid steer hitch to the left side of tiller hitch plate to side shift tiller 6" to the right.
Hook skid steer hitch to the right side of tiller hitch plate to center tiller on the skid steer.
Depth indicator Operator can tell how deep the tiller is working in the soil without leaving the seat.
Hydraulic depth control Operator can rotate skid steer hitch on the tiller skid shoes to any depth indicated on the
depth indicator. Operator does not have to adjust skid shoes to set tiller depth.
Rotor can be operated forward or reverse Allows operator to choose forward or reverse tilling by reversing hydraulic flow. Reverse tilling is good for breaking up hard ground and covering trash.
SRT62 offers a choice
between low flow or high flow
SRT76 is offered in high flow

Low flow (14 to 23 gpm) and high flow (23 to 42 gpm) allow these tillers to fit a wide variety of skid steers.
Case drain hose Reduces back pressure on motor which increases power for tilling and protects outer seal.
1/4" Heavy duty deck and
3/8" heavy duty end plates
Deck and end plates are built tough.
Replaceable skid shoes Keep bottom of end plates from wearing.
Bolt in spiral design rotor Reduces bouncing of tiller
Bolt-on tiller tines designed to
attach with one bolt per tine
Makes replacing tines fast and easy
Bi-directional hardened boron
steel tines
Tiller tines are built tough to last. Tines are sharpened on both edges to cut into the soil
while operating forward or reverse.

If bi-directional tines are used primarily rotating in one direction, they can be reversed
(turned around) to extend their life.
Motor guard Protects motor, fittings, and hydraulic hoses from damage caused by bumping into objects
around the motor.
Adjustable scarifier shanks
constructed of hardened steel
These shanks are built tough to rip up hard soil. They make tilling easier in hard soil.
Optional small flat face
couplers or large flat face couplers
Fits a wider variety of skid steers.


Model Number SRT62
Weight 785 (356)
Tilling width 62 (1.57)
Overall width 74 1/2 (1.89)
Tilling depth 2", 4", & 5.6"
Depth indicator
 Depth indicator (Viewable from operator seat)
Hydraulic requirements
Low flow motor
High flow motor
14-23 (53-87)
23-42 (87-159)
Hydraulic pressure range
Low flow motor
High flow motor
2800 (19.3) min. / 4500 (31) max.
2000 (13.8) min. / 4500 (31) max.
Motor rpm (Depending on skid
steer flow and pressure)
Low flow motor
High flow motor

143 to 245 rpm
133 to 244 rpm
Motor case drain Standard
Number of rotor flanges 9
Number of tines per flange 4
Tine construction Bi-directional forged harden "C" shaped
Direction of travel Bi-directional (forward and reverse)
Hitch type Universal Quick Attach Hitch
Side shift capabilities 6 (15.2) To the right
Skid shoes Replaceable
Rotor swing diameter 18.3 (46.5)
Number of shanks 5
Shank retainers Spring-loaded retaining clips2
Shank construction 3/4 x 2 1/2 x 16 (19 x 64 x 406) Adjustable hardened steel
with 3 adjustable depths
Deck plate
End plates

1/4 (6) steel plate
3/8 (10) steel plate