Search Inventory
Search Products & Site
Land Pride DZ3084

Features
Universal Quick Attach-Hitch, Meets ISO 24410 | Design for quick and easy attachment to most skid steers and track loaders |
Choice of 84" or 96" working widths | Allows customers to choose the blade that meets their operational needs. |
Blade pivots hydraulically 6-ways | Hydraulic adjustment provides for quick and easy blade positioning. Blade adjust 6-ways to meet the operator’s needs. |
Reinforced 3/8" moldboard with fully boxed bracing | Provides added strength and durability. |
3 1/2" Double acting welded hydraulic cylinders | Easily enables angling up to 30 degrees left or right, and tilts 10 degrees up or down. The material can easily be distributed where you want it to go. |
Standard operator mounting step | Provides for safer and easier mounting into and dismounting from the skid steer cab. |
26 1/2" Overall moldboard height | Provides ability to perform in deeper material conditions |
Replaceable bottom wear edge | Protects underside of moldboard against wear. |
Reversible and replaceable 3-piece cutting edge | 3-Pieces so that the end user can replace the entire cutting edge or just the high-wear corner sections to reduce maintenance cost. |
Heavy 3" diameter pivot pins with greasable hardened spring bushings | Large diameter pivot pins stand up to rugged use. Lubrication helps protect against wear and rust seizing. Hardened bushings can be replaced if needed. |
Specifications
Model Number | DZ3084 |
Weight | 1345 lbs (610.1 kg) |
Hitch type | Skid steer type Universal Quick-Attach, meets ISO 24410 |
6-Way blade adjustment | Top of hitch plate tilts forward or backward. Blade angles left or right. Blade tilts clockwise or counterclockwise. |
Maximum blade angle | 30 degrees left and 30 degrees right |
Maximum blade tilt | 10 degrees clockwise and 10 degrees counterclockwise |
Cylinder size | 3 1/2" bore x 8" stroke |
Maximum hydraulic pressure | 3500 psi (24.13 MPa) |
Maximum blade cutting width: At straight across At 30-degree angle |
84" (2.13 m) 72 3/4" (1.85 m) |
Moldboard thickness | 3/8" (10 mm) |
Moldboard height | 26 1/2" (67.3 cm) |
Pivot bushings | Replaceable and greasable, hardened spring bushings |
Pivot pin sizes | Angle pin = 3" x 11 5/8" lg. Pivot pin = 3" x 2 13/16" lg. |
Cutting edges End cutting edges Center cutting edge |
3/4" x 8" x 8 1/2" (1.9 cm x 20.3 cm x 21.6 cm) 3/4" x 8" x 66" (1.9 cm x 20.3 cm x 1.68 m) |
Wear edge | 1/2" x 4" x 84" (1.3 cm x 10.2 cm x 2.13 m) |
Featured New Product
Brillion Flail Shredder FS1806
Brillion Flail Shredders cut and shred residue with ease. Brillion Flail Shredders are available in 12’ and 15’ models. Offered in both 540 and 1000 RPM PTO drives, these machines can be used on a wide variety of tractor sizes and models