Kuhn 4835-838F
![Model 4835-838F for sale at Rusler Implement, Colorado Model 4835-838F for sale at Rusler Implement, Colorado](/assets/Uploads/Kuhn-4835-838F-2021.jpg)
Double tap to zoom
![](/assets/Uploads/Kuhn-4835-838F-2021.jpg)
4835 Series 4835-838F
The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in folding 8-, 9- or 11-shank models. 8- shank spacing choices include 36”, 38” and 40”, while 9- and 11-shank folding models offer 30” spacing. The unique horizontal fold configuration makes transport and storage more convenient. The 4835 can be equipped with spring reset shanks or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of points are available depending on your agronomic needs. - Less
The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water inf... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
3-POINT OR PULL-TYPE
3-Point or Pull-Type Configurations
3-Point Hitch
Designed for deep tillage with strength and durability in mind. This Category IV, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.
Rear Lift Drawbar Pull-Hitch
The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4835 in-line ripper. The drawbar pull-hitch includes (4) 280/70 R15 tires on the rear lift and (2) 280/70 R15 front mounted gauge wheel tires.
SHANK MOUNTS
Shank Mounts to Match Your Field Conditions
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
- Shear force: 10,000 pounds (approximate)
- 16” maximum shank working depth
- For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
- 2,500 pound point load
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
PathFind’R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
- Basic spring reset design
- Makes deep ripping possible on contours or terraces
- Deflects impacts improving performance in rocky soils
- Smoother steering under full power with tracked tractors
- Reduces stress on implement frame and 3-point tractor hitch
- Not compatible with pull-type hitch
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
SHANK & POINT OPTIONS
MRD Shanks, Points and Wings (Minimum Residue Disturbance)
Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.
- 1-1/4” Profile
- Austempered ductile, reversible wear bar
- Welded chromium carbide side plates
2” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 51% to 65%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
¾” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 68% to 75%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 68% to 75%
- Fracture: 31% to 48%
Standard No-Till Shank, Points and Wings
The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers lower operation cost versus competitors.
- ¾” profile
- High-tensile steel shank
- Austempered or chromium carbide points, wings and wear bar
- Chromium carbide side plates
- Residue remaining: Up to 86%
- Fracture: 55% to 70%
- Replaceable wear parts
- Optional 2" chromium carbide point with low-disturbance shank cap
2” Hard Surface Point
- Best performance for rocky conditions
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
Specifications
MODEL | 4835-838F |
Transport Width (ft/m) | 14'5" / 4.4 |
Frame Type | NEW Heavy Duty Toolbar 6" x 6" Double Rank Toolbar |
Number of Shanks | 8 |
Shank Spacing (in/cm) | 38" / 97 |
Working Width (ft/m) | 25'4" / 7.7 |
Spring Reset Shank Approximate Weight (lb /kg) | 8,464 / 3 839 |
Shear Bolt Shank Approximate Weight (lb/kg) | 6,851 / 3 108 |
STANDARD EQUIPMENT | |
Hitch Type | Category IV 3-Point with Parking Stands |
Coulter Blades | 22" x 1/4" Smooth, 450 lbs (250 kg) Down Pressure |
Shank Mount | Spring Reset: 2,500 lb Point Load, 20" Trip Height |
Shanks | No-Till (Very Low Surface Disturbance), ¾" Profile Wear Bar Austempered Ductile, Non-Reversible. Chromium Carbide Shank Side Protectors |
Points | 1-¾" Austempered Ductile Points, 8" Austempered Shattering Wings |
Depth Control | Ratchet Jack Adjustable Gauge Wheels |
Gauge Wheels | Two 20.5" x 8", Load Range E |
Wing Gauge Wheels | Two 20.5" x 8", Load Range E (One per Wing) |
Transport Locks and Safety | Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
OPTIONAL EQUIPMENT | |
Hitch Type | Drawbar Pull Hitch with Rear Lift Wheels, Includes Four 280/70 R15" Tires, Duals, Two 280/70 R15" Front Mounted Gauge Wheels, One 4" x 16" and One 4 1/2" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (less parking stands) |
Shank Mount | Rigid: Shear Bolt Protected, 10,000 lb (Shear Force) |
Shank Mount | Pivoting Pathfind'r Spring Reset, 2500 lb (Not Compatible with Pull Hitch) |
Shanks | MRD (Minimum Residue Disturbance) 1-1/4" Reversible Austempered Ductile Wear Bar, Chromium Carbide Shank Side Protectors |
Points | 2" Chromium Carbide Points |
Points | 2" Welded Points (MRD Shanks Only) (Recommended for Rocky areas) |
Points | ¾" Chromium Carbide Points (MRD Shanks Only) |
Shattering Wing | 5" Chromium Carbide Shatter Wings (MRD Shanks Only) |
Shank Cap | Low Disturbance Shank Cap (in lieu of wing) |
Closing Wheels | (2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (limit shank soil blowout) |
Shank Stagger Kit | 6" Offset Between Shanks |
OPERATING INFORMATION | |
Recommended Operating Speed (mph/km/h) | 4 - 7 / 6 - 12 |
Recommended Working Depth | 8" - 16" / 20 - 41 |
Recommended Tractor Power Range (mph/kw/h) | 30 - 40 PTO hp per Shank / 22- 30 kW |