Kuhn OPTIMER+ 5003
Double tap to zoom
THOROUGHLY MIX RESIDUES
Curved Disc Blades
20”, curved disc blades, with large notches, aggressively shred crop residue and evenly mix it into the soil. The blades are angled, both horizontally and vertically, to work completely across the soil profile. The disc with notches excels in working in large quantities of plant residues, shredding crop residues and ensuring even mixing of the soil and residues.
Large arms provide nearly five inches of additional frame clearance, so you can power through even the heaviest residue conditions without fear of plugging.
Disc Attack Angle Inclines
The disc attack angle inclines to give the machine a large area to penetrate the soil. The shape of the discs provides intensive mixing of soil and crop residues.
EASY SOIL PREPARATION
Variety of Roller Options Available
Operators are able to choose from either a T-Ring or T-Liner roller for their machine. The T-Ring roller (shown) works well in clay or heavy soil. It provides the soil with even firming, while maintaining a smooth finish. It also assists with straw decomposition. The T-Liner roller comes in a solid tube design. It performs best in rocky conditions and provides good crumbling for the entire working width of the machine.
SAVE YOUR PRECIOUS TIME
Low Maintenance Features to Save You Precious Time
The hubs on the Optimer+ feature a double row of oblique-contact ball bearings that are sealed and lubed-for-life to eliminate maintenance headaches for operators.
Independent Disc Protection
A system of four polyurethane elastomer blocks allows each disc to move independently in case the machine strikes an obstacle. With this system, the working depth will not be altered across the rest of the machine if it were to strike an obstacle.
Trailed Optimer+ models can be equipped with front gauge wheels to till the soil perfectly. These wheels are hydraulically assisted for more comfort.
|Maximum PTO allowed||250 hp (184 kW)|
|Minimum PTO power requirement||150 hp (110 kW)|
|Working width||16'5" (5.0 m)|
|Transport width||9'10" (3.0 m)|
|Number of discs||40|
|Working depth||1.25" - 3.9" (3.1 cm - 10.0 cm)|
|Side deflectors||Left as standard, right as option|
|Hitch type||Semi-mounted Cat. 3|
|Machine weight approx.||11,303 lbs (5,127 kg)|
|Hydraulic requirements||2 DA|
|Notched disc diameter||20" (50.8 cm)|
|Rear leveling spring tine harrow||Optional|
|T-ring type 23.5" (600 mm) roller||Standard|
|Inter-disk crumbling baffle||Standard|
|Road lights and signaling||Standard|