Fully Welded Cutterbar
The fully welded Kubota cutterbar with overlapping C-channels makes for a stiff and strong design, ensuring a high level of durability. The cutterbar’s design, with machined gears and large bearings along with low oil requirements, allows for a low working temperature for efficient oil cooling and lubrication of the entire cutterbar.
The DM3087 center suspension system ensures optimal tracking and precise ground contour following. The DM4032 allows you to set the height of the tractor linkage and adjust ground pressure by tightening the suspension springs.
When you hit an obstacle, the non-stop breakaway system will be activated and swing the machine backwards and over the obstacle and then return it to the original working position. No need to stop – no time lost.
Eco Speed (DM4032)
By switching the pulleys, the 2-speed driveline can be set to eco speed, which reduces the rpm from 1000 to 750, thus lowering fuel consumption.
Vertical Transport Position
When in transport, the mowers are folded to a vertical position well behind the tractor. The center of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.
Counter-Rotating Three-Bladed Discs
With three blades per disc Kubota mowers are constantly cutting. This means a third less load per blade; an even load on the drive; smoother power usage; and produces an even, cleanly cut stubble.
Low Horsepower Requirements
The DM3087 cutting solution allows farmers to effectively mow extensive areas with a relatively small tractor (140 HP), while the DM4032 distinguishes itself through its excellent cutting performance and its unique ability to adapt to a variety of terrain.
|Cutting Width ft. (m)||Cutting Width ft. (m)10' 6" (3.2)|
|Weight lbs. (kg)||Weight lbs. (kg)1566 (710)|
|Hitch (CAT)||Hitch (CAT)2|
|Minimum PTO Horsepower Required HP/KW||Minimum PTO Horsepower Required HP/KW40/29|
|Number of Disc and Knives||Number of Disc and Knives8/24|