Available Working Widths
- DM1017 – 5’6”
- DM1022 – 7’2”
- DM1024 – 7’9”
Spring Loaded Breakaway
When an obstacle is encountered, the DM1000 series swings backwards to protect the cutterbar; by reversing, the mower is reset into working position.
Fast Lift on Headlands
The mower is easily lifted via a hydraulic cylinder without activating the tractor’s 3-point linkage. This causes less wear on the tractor and the machine, as the PTO stays in the same position, minimizing vibrations in the transmission.
Vertical Transport Position
When in transport, the mowers are folded to a vertical position well behind the tractor. The center of gravity is close to the tractor, which ensures excellent weight distribution and transport stability.
Counter-Rotating Three-Bladed Discs
With three blades per disc Kubota mowers are constantly cutting. This means a third less load per blade; an even load on the drive; smoother power usage; and produces an even, cleanly cut stubble.
|Cutting Width ft. (m)||Cutting Width ft. (m)5'6" (1.7)|
|Weight lbs. (kg)||Weight lbs. (kg)860 (390)|
|Transport Width ft. (m)||Transport Width ft. (m)3' 9" (1.2)|
|Hitch (CAT)||Hitch (CAT)2|
|Pin Hitch||Pin HitchNot Available|
|PTO RPM||PTO RPM540|
|Minimum PTO Horsepower Required HP/KW||Minimum PTO Horsepower Required HP/KW36/27|
|Number of Disc and Knives||Number of Disc and Knives4/12|
|Cutterbar Operating Angle||Cutterbar Operating Angle-45/+15|
|Stubble Height in. (mm)||Stubble Height in. (mm)0.78"-1.97" (20-50)|
|Non-Stop BreakAway||Non-Stop BreakAwayN/A|
|Overrun Clutch||Overrun ClutchStandard|
|Swath Board (RH/LH)||Swath Board (RH/LH)Standard/Optional|
|Swath Rollers (RH/LH)||Swath Rollers (RH/LH)Optional (RH)|
|High Skids +20/+40/+80 mm||High Skids +20/+40/+80 mmOptional|
|Lighting Kit||Lighting KitOptional|