Cutting Width
10’ 4”
Cutting Height
0.95” - 3.2”
Disc Speed
2,835 RPM
PTO Required
60 HP
Search Inventory
Search Products & Site
Case IH TD103
Double tap to zoom
TD103
Pull-Type Disc Mowers
The Case IH TD103 pull-type disc mower features a smooth ride, clean cut, superior trailing ability and narrow transport width, plus easy tractor hookup using a simple clevis hitch.
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
Cutterbar
Superior Crop Flow
The Case IH TD103 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing.
Versatility and Convenience
- Quick change knives cut change time in half. Simply use the provided tool, no wrenches necessary.
- Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
- Two end discs that co-rotate to provide a narrower swath
- Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
- Left cutterbar shield is hinged for easy service access
Unmatched Reliability
- Shock protection to minimize repair expense
- Discs protected from internal gear damage by the drive hub
- 3-year cutterbar warranty includes one full-year of base factory warranty, plus two additional full years and unlimited hours of extended factory disc cutterbar warranty
80-degree Constant Velocity Joint
- Overload protection is standard
- Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
- Standard tractor tire bumpers protect PTO driveline and tractor tires
Adjustable From 2-10 Degrees
Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.
Easy Transport
Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch . The TD103 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.
- Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
- Removable parking jack stand is stored on top of tongue assembly
- Hydraulic tongue swing cylinder powers the unit from transport to operating position
- Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
- Hinged right-side cutterbar shield folds up for narrow transport
- Safety tow chain standard
- Low transport height eliminates the need for implement lights
Specifications
| Number Of Discs | 8 |
| Position Relative To Tractor | Trailing, side-pull |
| Cutting Width ft/in [ m ] | 10 ft 4 in [3.15] |
| Swath Width - Ft-in (m) | 7' 11" (2.41) |
| Cutting Height - In (mm) | 0.95-3.2 (24-81) |
| Mowing Arc From Horizontal | Trailing wheels follow ground |
| Breakaway Angle | Breakaway latch, spring-loaded |
| Knives Per Disc | 2 |
| Disc Speed rpm | 3000 |
| Disc Cutting Diameter inches [ mm ] | 19.7 [500] |
| Drive Between Discs | Bevel gears in sealed modules |
| Required Tractor Power hp [ kW ] | 60 [45] |
| PTO Rated Speed rpm | 540 |
| Hitch Category | Pin to drawbar |
| Hydraulic Circuits Required | Two (one single, one double-acting) |
| Transport Width - Ft-in (m) | 10' 10" (3.30) |
| Transport Length ft/in [ m ] | 15 ft 8 in [4.78] |
| Transport Height ft/in [ m ] | 5 ft 2 in [1.57] |
| Weight lbs [ kg ] | 2610 [1186] |
| Trailing Tire Size | 27x9.5-15, 6PR |
| Swath Width ft/in [ m ] | |
| Transport Width ft/in [ m ] | |
| Min Cutting Height inches [ mm ] | |
| Max Cutting Height inches [ mm ] |
Featured New Products
