Search Inventory
Search Products & Site
Brillion SSP16

Features
Sure Stand Seeder…16 Feet in Every Pass
- Seeding Width is 16’ – The Widest Non-Folding Seeder Offered by Brillion
- Available in Pull-Type or Three-Point Hitch Configurations
- Transport Width is 18’2”
- Heavy-duty All Welded Structural Steel Frame Construction Provides More Weight per Foot on Rollers
- Pulverizer Wheels are 15 ¾” Cast Iron on Front Roller and 11 ½” Cast Iron on Rear Roller
- Pneumatic Down Pressure on Rear Roller
- Positive Ground Driven Seed Metering
- Micro-Meter Seed Box with Meters Spaced at 8”, Capacity of 20 Bushels
- Cat. II, III Free Link or Cat. II, IIIN, III Quick Coupler Three-Point Hitch
- Cat. II or III Pull-Type Hitch
- (4) 11L x 15-12 Ply Transport Tires on Pull-Type Models
- Optional S-Tine or Coil Tine Track Remover
- Optional Electronic Acre Meter Kit
- Optional Electric Clutch with Seed Shaft Sensor and Monitor
- Scale Ready
- LED Warning Lights and SMV Emblem
- Powder Coat Paint
Specifications
Model | SSP16 |
Approximate Weight | 5,519 lbs. (2,503 kg) |
Working Width | 16 ft. 0 in. (4.8 m) |
Transport Width | 18 ft. 2 in. (5.5 m) |
Transport Height | Tractor Dependent |
Transport Length | Tractor Dependent |
Road Clearance | Tractor Dependent |
Working Overall Height | 4 ft. 9 in. (1.4 m) |
Working Overall Length | 5 ft. 11 in. (1.8 m) |
Seed Box | All Steel Construction with Cover |
Seed Box Capacity (Micro-Meter) | 20 bu. |
Seed Meters | "Micro-Meter" |
Seed Meter Drive | Ground Driven |
Seed Meter/Opening Spacing | 8 in. (203 mm) |
Seed Delivery | Broadcast with Wind Deflector Tray |
Pulverizer Roller - Front | 15.75 in. (400 mm) Cast Iron |
Pulverizer Roller - Rear | 11.5 in. (292 mm) Cast Iron |
Pulverizer Axle Bearings | 1.75 in. (45 mm) Flange Bearing Sealed |
Pulverizer Axle Size - Front | 12.75 in. (324 mm) |
Pulverizer Axle Size - Rear | 8.625 in. (219 mm) |
Hitch Type | Three-Point Hitch |
Hitch Category | Cat. II, III Free Link; Cat. II, IIIN, III Quick Coupler Hitch |
Tire Size | N/A |
S-Tine Wheel Track Remover | Optional |
Coil Tine Wheel Track Remover | Optional |
Electronic Acre Meter | Optional |
Electric Clutch with Seed Shaft Sensor and Monitor | Optional |
Seed Box Scale System | Optional |
Safety Warning Lights & SMV Emblem | Standard |
Safety Chain Kit | N/A |
Powder Coat Paint, Red | Standard |
Horsepower Requirements | 6 to 8 HP (4.5 to 6 kW) per ft. |
Required Three-Point Hitch Lift Capacity | 6,719 lbs. (3,048 kg) Minimum |
Recommended Operating Speed | 4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions |
Featured New Product
Land Pride AG15 Series Arena Graders AG1560
Land Pride's AG1560, AG1572 & AG1584 are entry level Arena Graders for hobbyists and enthusiasts. The Cat 1 hitch is quick hitch compatible and ties into a 2" x 2" square tube frame. The end tubes are 2" x 3". The S-tines feature replaceable tips. Behind the two rows of...