Search Inventory    Search Products & Site

Brillion SS16

Model SS16 for sale at Rusler Implement, Colorado

Double tap to zoom

 

Features

Sure Stand Seeder…16 Feet in Every Pass

  • Seeding Width is 16’ – The Widest Non-Folding Seeder Offered by Brillion
  • Available in Pull-Type or Three-Point Hitch Configurations
  • Transport Width is 18’2”
  • Heavy-duty All Welded Structural Steel Frame Construction Provides More Weight per Foot on Rollers
  • Pulverizer Wheels are 15 ¾” Cast Iron on Front Roller and 11 ½” Cast Iron on Rear Roller
  • Pneumatic Down Pressure on Rear Roller
  • Positive Ground Driven Seed Metering
  • Micro-Meter Seed Box with Meters Spaced at 8”, Capacity of 20 Bushels
  • Cat. II, III Free Link or Cat. II, IIIN, III Quick Coupler Three-Point Hitch
  • Cat. II or III Pull-Type Hitch
  • (4) 11L x 15-12 Ply Transport Tires on Pull-Type Models
  • Optional S-Tine or Coil Tine Track Remover
  • Optional Electronic Acre Meter Kit
  • Optional Electric Clutch with Seed Shaft Sensor and Monitor
  • Scale Ready
  • LED Warning Lights and SMV Emblem
  • Powder Coat Paint

Specifications

Model SS16
Approximate Weight 6,757 lbs. (3,065 kg)
Working Width 16 ft. 0 in. (4.8 m)
Transport Width 18 ft. 2 in. (5.5 m)
Transport Height 6 ft. 0 in. (1.8 m)
Transport Length 16 ft. 2 in. (4.9 m)
Road Clearance 13 in. (330 mm)
Working Overall Height 4 ft. 9 in. (1.4 m)
Working Overall Length 17 ft. 0 in. (5.2 m)
Seed Box All Steel Construction with Cover
Seed Box Capacity (Micro-Meter) 20 bu.
Seed Meters "Micro-Meter"
Seed Meter Drive Ground Driven
Seed Meter/Opening Spacing 8 in. (203 mm)
Seed Delivery Broadcast with Wind Deflector Tray
Pulverizer Roller - Front 15.75 in. (400 mm) Cast Iron
Pulverizer Roller - Rear 11.5 in. (292 mm) Cast Iron
Pulverizer Axle Bearings 1.75 in. (45 mm) Flange Bearing Sealed
Pulverizer Axle Size - Front 12.75 in. (324 mm)
Pulverizer Axle Size - Rear 8.625 in. (219 mm)
Hitch Type Drawbar with Hydraulic Transport
Hitch Category Cat. II, III
Tire Size (4) 11L x 15, 12 Ply Implement Rib
S-Tine Wheel Track Remover Optional
Coil Tine Wheel Track Remover Optional
Electronic Acre Meter Optional
Electric Clutch with Seed Shaft Sensor and Monitor Optional
Seed Box Scale System Optional
Safety Warning Lights & SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Red Standard
Horsepower Requirements 6 to 8 HP (4.5 to 6 kW) per ft.
Required Three-Point Hitch Lift Capacity N/A
Recommended Operating Speed 4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions