Search Inventory    Search Products & Site

Brillion WLB-3631-25

Model WLB-3631-25 for sale at Rusler Implement, Colorado

Double tap to zoom

 

Features

  • Three-Section Folding Models in 25’, 30’ and 36′ Working Widths
  • Designed for Improved Residue Flow Through the Machine
  • Three Rows of Shanks on Overall 6” Spacing
  • Two-Piece Edge Bent S-Tine Shanks for Better Leveling
  • 23” Under Frame Clearance
  • 18” Between Shanks, Minimum of 24” Between Rows
  • 2” Reversible Points
  • Maximum Shank Operating Depth of 5”
  • Two-Row Coil Tine Harrow in Front of Rear Roller
  • 8” Roller Axles
  • 61mm Heavy-Duty Bearings
  • 24” Notched Ductile Iron Wheels
  • Rear Scrapers Standard on Notched Rollers
  • From Transport Hitch Floats 25 Degrees Up and 17 Degrees Down
  • Wings Float 6 Degrees Down
  • Single Point Depth Control
  • Wing Hydraulic Down Pressure
  • Dual Transport Wheels
  • (4) 320/70R15 Tires on 25’ Model
  • (4) 380/55R X 16.5 Tires on 30’ Model
  • (4) 480/45R17 Tires on 36′ Model
  • Cat. III, IV or V Hitch
  • Transport Height – 9’6” for 25′ and 30′ Model; 13’8″ for 36′ Model
  • Transport Width – 14’8” for 25’ Model; 17’ for 30’ Model; 18’10” for 36′ Model
  • LED Warning Lights and SMV Emblem
  • Safety Chain Kit
  • Powder Coat Paint

Specifications

Model WLB-3631-25
Approximate Weight 25,002 lbs. (11,341 kg)
Working Width 25 ft. (7.6 m)
Transport Width 14 ft. 8 in. (4.5 m)
Transport Height 9 ft. 6 in. (2.9 m)
Overall Length (Transport) 29 ft. (8.8 m)
Road Clearance 15 in. (381 mm)
Type of Pulverizer Wheel - Front 24 in. (609.6 mm) Notched Ductile Iron
Number of Pulverizer Wheels - Front 77
Type of Pulverizer Wheel - Rear 24 in. (609.6 mm) Notched Ductile Iron
Number of Pulverizer Wheels - Rear 77
Rear Roller Scrapers Standard
Roller Axle Size 8 in. (203 mm)
Bearing Type 61 mm Heavy-Duty
Type of Shanks Heavy-Duty Two-Piece Edge Bent S-Tine Shank 1.75 in. x 0.625 in. (44.5 x 15.9 mm)
Number of Shanks 49
Nominal Shank Spacing 6 in. (152 mm)
Maximum Shank Depth of Operation 5 in. (127 mm)
Under Frame Clearance 23 in. (584 mm)
Hitch Pull-Type with Hydraulic Lift
Hitch Category Cat. III, IV or V
Tire Size (4) 320/70R15
Hydraulic Circuits Required 3 + Case Drain (+1 for Rear Hitch)
Wing Hydraulic Down Pressure Standard
Hydraulic Tooth Control Single Point Depth Control
Two-Row Coil Tine Harrow Standard
Rear Hitch Optional
Front Roller Scraper Kit Optional
Land Leveler Kit Optional
V-Leveler Kit Optional
Rear Three Row Coil Tine Harrow Kit Optional
LED Warning Lights & SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint Standard
Horsepower Requirements 10 to 12 HP (7.5 to 8.9 kW) per ft.
Recommended Operating Speed 6 to 8 MPH (10 to 13 km/h)