Art's Way LS1400S
Double tap to zoom
Push a lot of dirt with maximum capacity blade
With 15 in. ground clearance and 30 in. blade height, you can do a lot of work in a short period of time. Reinforced on the back of the blade with industrial steel cross beams, the blade is built structurally strong. Angled reinforcement beam at the cutting edge keeps the cutting edge straight. Made of heat treated, high carbon steel gives the cutting blade longer life before replacing.
Designed for smooth performance
High curved blade reduces drag and maximizes dirt transfer. Use with or without the scraper ends for maximum control of flow. Blade tilts up to 15 degrees for slope cuts and with 43 degrees of angle, the blade swings wide increasing working range.
Variety of sizes available
With this attachment, you can tackle most any grading operation.
- 12, 14 and 16 ft. models
- Tractor range 60-220 HP
Rear side cylinder control
Rear side cylinder provides blade tilt control up to 15 degrees in either direction.
Blade angle control
Main two cylinders (with relief valve)provide blade angle control up to 43 degrees either direction.
Rear cylinder provides depth control for convenience of different cutting positions.
Single/dual heavy-duty hitch
Single/dual heavy-duty hitch with swivel allows blade tilt without putting added pressure to your tongue.
Open end or box end scraper options
Drop down end caps provide the flexibility for open end or box end scraper options in one easy step.
Rear weight box
Rear weight box for additional weight provides effective grading and helps prevent side slip on aggressive cutting.
- Weight box standard with each model
- All cylinders and hoses included
- Storage parking jack
- Replaces the need for 3 pt. scraper
|Blade Angle||43 degrees|
|Blade Tilt||15 degrees|
|Grader Overall Length||17' 5"|
|Clearance to Ground||15"|
|Transport Width Unpinned||9'|
|Tires||2 - 11L x 15|
|Hubs||6 - Bolt|
|HP Requirements||80 - 200|
|Total Weight||3050 lbs.|
|Tongue Weight||610 lbs.|
|Frame Tube Size||8 x 6 x 5/16|