New Holland BigBaler 340 High Density » Rusler Implement, Colorado
Search Inventory    Search Products & Site

New Holland BigBaler 340 High Density

Double tap to zoom

 

Features

RUGGED DURABILITY

A robust frame manages higher-density loads delivered by the plunger for long-term durability and reliability season after season.

SMOOTH BALER ENGAGEMENT

Exclusive SmartShift™ gearbox features two-speed start-up technology for smooth baler engagement while protecting the tractor’s driveline.

HYDRAULIC AXLE SUSPENSION

Provides excellent ground following ability and superior accessibility underneath the baler.

STRONGER KNOTS

Patented Loop Master™ knotter system increases overall bale tensile strength up to 26% for lower operating costs while eliminating twine offcuts.

Specifications

BigBaler 340 High Density
Bale Dimensions
Width in. (cm) 47 (120)
Height in. (cm) 35 (90)
Minimum / Maximum length in. (cm) 39 / 118 (100 / 300)
Tractor Requirements
Minimum PTO power hp(CV) [kW) 230 (170)
PTO speed / type 1000 rpm / 20 spline shaft
Hydraulic remotes 2 x double acting & 1 x single acting or 2 double acting + Load Sensing power beyond port*
Main Drive
Mid gearbox type SmartShift™ 2 speed powershift
Mid gearbox features Smooth two-speed start-up, smart brake technology and overload protection
Main gearbox type Super duty twin drive gears driving the main output gear
Main gearbox type rpm 1440
5 Bar MaxiSweep™ Pick-up
Width (DIN 11220) ft. (m) 7.7 (2.35)
Roller windguard Standard
Feed assist auger Standard
Number of double tines 85
Tine diameter in. (mm) 0.2 (5.5)
Flotation Adjustable spring
Gauge wheels / Castering gauge wheels Standrad / Optional
Standard tires / HD tires Standrad / Optional
Pick up slipclutch protection Standard
CropCutter™ System
CropCutter™ System Standard
Number of knives 29
Theoretical cut length in. (mm) 1.5 (39)
Knife removal Sliding knife drawer
Knife activation, in - out Hydraulic
Knife protection Individual springs
Feeding System
Rotor Width 1200 mm «W» tine configuration with paired rotor fingers per knife
Hard faced rotor Optional
Rotor protection Cut-out clutch
Stuffer Fork type with 6 tines
Stuffer protection Shearbolt
SmartFill™ II system Standard
Plunger
Speed Strokes/min 48
Length of stroke in. (mm) 29 (748)
Tying System
Type Loop Master™ double knot type
Twine type 100-130 m/kg grade
Number of twines 6
Knotter fan type Electric
Number of knotter fans 3
Electronic bale length / Knotter engagement system Standard
Knotter function alert IntelliView™ monitor and knotter flags
Knotter lubrication Grease
Twine ball capacity 36 XL
Hydraulic foldable twine boxes Standard
Bale Density System
7 double acting cylinders proportional controlled IntelliView™ monitor controlled
Electronic Control System
ISOBUS compatible Standard
ISOBUS III IntelliCruise™ system Optional
26.4 cm color touchscreen IntelliView™ IV monitor Optional
PLM GPS data logging Optional
Lights
Standard LED work lights Front & rear road lights, 2 x rear work lights, 1 x rotary beacon, LED strip lights on the knotter, pickup and needles
Optional LED service lights Left and right hand side stuffer lights, left and right hand side twine box lights
Axles
Large wheel tandem axle with Auto-Steer system tire size 600/50R22.5 or 600/55R26.5
Hydraulic suspension Standard
Brakes
Pneumatic / Hydraulic Standard / Optional 
Maximum Traveling Speeds
Large wheel tandem axle (kph) 60**
Baler Dimensions
Length chute closed in. (mm) 352 (8936)
Width in. (mm) 118 (2987)
Height folded railing up in. (mm) 136 (3454)
Height folded railing down in. (mm) 122 (3099)
Weight (Empty on 600/55R26.5) lb. (kg) 32,188 (14,600)
Standard Equipment
Standard Equipment Roller windguard, automatic greasing system, standard Bale-Eject™ system, roller bale chute with hydraulic folding, foldable railing
Optional Equipment
Optional Equipment Comfort pack, Partial bale-Eject™, camera monitoring system, ActiveWeigh™ system, moisture measuring system, hard face knife kit, rear bumper