The Land Pride HRS30 Series Hydraulic Reservoir System is ideal for tractors that aren't equipped with a hydraulic system large enough to operate equipment that requires continuous circulation of hydraulic fluid such as Land Pride’s SA Series Post Hole Diggers, SR Series Power Rakes, SC Series Rotary Cutters and AB Series Angle Brooms. It can also be used to operate draw bar attached equipment, such as a hydraulic-driven rock picker, or remotely located equipment, such as hydraulic-driven log splitters, sawmills, and transfer pumps.
The HRS3025 (3000 psi at 30 GPM) and 35 gallon hydraulic reservoir with oil filter are designed to provide plenty of hydraulic flow for just about any attachment in these operating ranges. The HRS3025 is equipped with an oil cooler to protect against oil overheating in heavy-duty applications. - Less
The Land Pride HRS30 Series Hydraulic Reservoir System is ideal for tractors that aren't equipped with a hydraulic system large enough to operate equipment that requires continuous circulation of hydraulic fluid such as Land Pride’s SA Series Post Hole Diggers, SR Series Power Rakes, SC Series Rotary Cutters and AB Ser... + Read More
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
52 HP requirement for approximately 25 GPM @ 3000 PSI and 540 RPM
35 GALLON SELF CONTAINED RESERVOIR WITH 10 MICRON FILTER
Provides more than ample amounts of clean and cool hydraulic fluid for even the most demanding applications.
STEEL CONSTRUCTION ON HYDRAULIC TANK
Provides for long service life in harsh environments.
STANDARD REVERSING SOLENOID
Allows powered implements, motors, and cylinders to be reversed for expanded range of performance capabilities.
STANDARD PRESSURE RELIEF VALVE
Protects hydraulic system from overloads or unanticipated stalls.
STANDARD CASE DRAIN PORT
Enables attachment and usage with implements equipped with and requiring case drain return lines.
STANDARD COMPLIMENT OF HYDRAULIC FITTINGS & TWO 23’-9"OF HYDRAULIC HOSES SUPPLIED
Enables ready attachment and adaptation to a wide range of tractors and applications.
MULTI-FUNCTIONAL ELECTRONIC REMOTE TETHER CONTROL
Enables forward and reverse continuous flow or intermittent forward or reverse flow from the tractor seat or on the ground.
Easy hook-up to rear PTO tractor shaft.
OIL COOLER IS STANDARD
For oil cooling when necessary. Included with hand valve & solenoid valve options. Optional with no valve option.
INTEGRAL STORAGE STANDS
Provides for easy installation and removal from the tractor and clean and convenient long term storage.
Specifications & Capacities
Minimum tractor horsepower
Maximum hydraulic horsepower output
Approx. 25 gpm @ 540 rpm at 3000 PSI
PTO input speed
Hydraulic fluid type
Mobil Fluid 424 (See www.mobil.com for alternate fluids)
LE 10 Micron filter
Oil level check
Oil fill cap with dipstick
Hydraulic relief valve
3-Point Cat. l & ll with clevis style lower hitch, Quick hitch adaptable
ASAE Category 2
Pressure & return hose lengths
24 Feet each
Case drain port
Optional & Accessory Equipment
Flow Control Option
No Valve No Cooler (Pressure relief valve provided for protection) No Valve With Cooler (Pressure relief valve provided for protection) Manual Operated Valve With Oil Cooler (Pressure relief is built into the valve) Solenoid Operated Valve With Oil Cooler (Pressure relief is built into the valve)
Small flat face couplers Option
1/2" body size (Includes adapter for attaching to hoses with 1 5/16" threads)
Large flat face couplers Option
3/4" body size (Attach to hoses with 1 5/16" threads)
Case drain kit Option
Complete with 3/4" MORB x 9/16" MJIC elbow, 23'-9" of 3/8" hydraulic hose, and one 3/8" body flat face low spill quick coupler male tip