Search Inventory    Search Products & Site

Kuhn VT 180 GII TRUCK (FRONT|SIDE)

Model VT 180 GII TRUCK (FRONT|SIDE) for sale at Rusler Implement, Colorado

Double tap to zoom

 

Features

SUPERIOR FEED MOVEMENT

Cone-Style Auger & Kicker Design

New cone-style augers provide superior feed movement for faster, more complete mixing and processing. The smooth, continuous auger flighting (1) creates a rolling feed action that improves mixing. The top cover of the auger has a steep angle to aid in bale movement when processing round bales and to prevent feed from sitting on top of the auger between mixes. The straight bolt-on kicker (2) provides a fast and even discharge. Each lead flight is equipped with a cast iron scraper (3) that pulls material away from the tub walls into the auger for a better overall mix. Both the kicker and scraper are bolt-on attachments, making replacement very easy to save you precious time.

Hardened Knives

Large, 15” or 20”, replaceable hay cutting knives are available to best handle the material to be processed. The knives have two positions to adjust the aggressiveness of the knife angle. Versatility of knife length, angle and position allow for an optimal setting with a wide variety of ration ingredients.
•A: Knife set in for slicing and cutting
•B: Knife set out for grabbing and tearing

Efficient Mixing Chamber

Straighter sides, smoother curves and steeper baffles help promote a fast, complete mix for a fluffy, palatable ration. No preprocessing or special loading is required for round or square bales making it easy to load and use. Faster auger speeds also provide quicker, more complete cleanout.

Large Unloading Doors

For unmatched feed flow, these mixers feature the largest discharge door available in the industry. The discharge linkage allows for rapid opening and closing of the door.

Adjustable Hay Stops

The adjustable hay stops provide flexibility in processing to provide you with the cut length necessary to reach the optimal nutritional value you’re striving for. This adjustability makes hay processing more efficient and helps minimize overprocessing.

SIMPLE, DEPENDABLE DRIVE

Patented 2-Speed, Split Drive

The patented drive system on the VT 180 and 1100 mixers consists of a 2-speed, split-drive gearbox, two planetary gearboxes and two torque-disconnect PTOs. This system provides reliable performance and long service life with a simple and quiet design. Truck and trailer models only.
The 2-speed, split-drive gearbox provides the flexibility of high and low speeds without adding another gearbox. It allows for a lower horsepower and easier starting speed (28 rpm in low) while also having a high speed for fast mixing and more complete cleanout (41 rpm in high). The gearbox can be shifted manually on the machine or with an in-cab electric shift option for operator convenience.

Heavy-Duty Gearboxes

The twin planetaries are designed to provide dependable performance and long life. The drive systems allow the use of single-stage planetaries, which produces far less heat for easier cooling.

Torque-Disconnect PTOs

Two automatically resetting torque-disconnect PTOs provide independent protection for each planetary. This helps guard against obstructions encountered by each individual auger, ensuring reliable service and longer life.

Easy Accessibility

Easily pull the planetary from the top of the mixer for improved and easier service. This easy accessibility is especially helpful for truck mount models as it does not require dismounting the mixer from the chassis. The image shown is from a KUHN Knight VTC model.

Truck Models

On truck models, they hydrostatic drive allows control of the full range of auger speeds, from within the cab, without stopping to shift. It is available in FEPTO or REPTO drive configurations. This drive uses the same proven gearbox and driveline setup as the trailer models to ensure drive components are protected from damage.

MULTIPLE CONFIGURATIONS

Multiple Door Options

Various door configuration options on trailed and stationary models offer flexibility to fit a variety of feeding situations. The large discharge openings provide fast, even unloading from front, side and rear door locations for maximum efficiency.

Choose a front door for clear visibility of the material coming out of the door. The front cross conveyor uses rugged components for unmatched dependability. A heavy-duty, steel floor, along with the heaviest conveyor chain in the industry, helps ensure long life and less down time. New discharge options provide the ultimate in versatility to match most feeding situations.

Trailer models offer doors on either or both sides, while truck models offer a left-side door. The large openings allow fast unloading with comparable feed flow out of one door that many competitive machines get with two.

A rear commodity door is available. The large opening provides fast discharge, even with high-roughage premixes. A discharge tray is included on truck models to direct material flow for clean, accurate feed placement.

Trailer or Truck Configurations

To suit your operation’s needs, KUHN VT 180 and 1100 mixers are available in a trailer or truck-mounted configuration.

Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not being used for feeding.

Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.

Specifications

Model VT 180 GII TRUCK (FRONT|SIDE)
Capacity 800 ft³ (22.7 m³)
Capacity with Extensions 880 ft³ (25 m³)
Maximum Net load 26,400 lbs (11,975 kg)
Overall Height 119" (302 cm)
Overall Height - With Hay Retention Ring 125" (318 cm)
Overall Height - 8" (20 cm) Belt Extensions 127" (323 cm)
Overall Length 262" (665 cm) | 234" (594 cm)
Mixing Chamber Length 234" (594 cm)
Overall Width - Mixer Only (No Discharge) 117" (297 cm)
Tread Width 100" (254 cm)
Number of Augers 2
Auger RPM - Standard / High Speed 27/40
PTO Drive 1,000 RPM
PTO Protection Torque-Disconnect
Knives per Auger (Standard / Maximum) 6-May
Auger Diameter 104" (264 cm)
Lower Auger Flighting Thickness 3/4'' (1.9 cm)
Upper Auger Flighting Thickness 5/8" (1.6 cm)
Unit Weight 17,900 lbs (8,120 kg)
Weighing System 4-Point
Front Door Opening Size 48" x 40" (112 x 102 cm)
Side Door Opening Size 42" x 40" (107 x 102 cm)
Rear Door Opening Size 48" x 40" (112 x 102 cm)
Floor Thickness 3/4" (1.9 cm)
Sidewall Thickness 1/4" (0.6 cm)
Slide Tray - Maximum Height 28'' (71 cm)
Slide Tray - Maximum Reach 26'' (66 cm)
Front Incline Chain & Slat Conveyor - 24"/36" (61/91 cm) - Maximum Reach 19"/28" (48/71 cm)
Front Incline Chain & Slat Conveyor - 24"/36" (61/91 cm) - Maximum Height 60"/65" (152/165 cm)
Front Flat Chain & Slat Conveyor - Maximum Reach 10'' (25 cm)
Front Flat Chain & Slat Conveyor - Maximum Height 50'' (127 cm)
Front Flat Belt Conveyor - Maximum Reach 10'' (25 cm)
Front Flat Belt Conveyor - Maximum Height 50'' (127 cm)
Truck Drive Hydrostatic
Truck Subframe Tandem Axle
Cab-Mounted Indicator Mount and Joystick Controls Standard
Steel Rear Bumper Standard
Clearance Light Kit Standard