Kuhn 4830-736F
Features
3-POINT OR PULL-TYPE
3-Point or Pull-Type Configurations
3-Point Hitch
Designed for deep tillage with strength and durability in mind. This Category III, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.
Drawbar Pull-Hitch (Small Frame)
The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Equipped with four 280/70 R 15 tires, the drawbar hitch provides excellent field flotation and depth control.
Drawbar Pull-Hitch (Large Frame)
The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Four 280/70 R15 tires rear and (2) 280/70 R15 tires on front mounted gauge wheels.
SHANK MOUNTS
Shank Mounts to Match Your Field Conditions
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
- Shear force: 10,000 pounds (approximate)
- 16” maximum shank working depth
- For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
- 2,500 pound point load
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
PathFind’R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
- Basic spring reset design
- Makes deep ripping possible on contours or terraces
- Deflects impacts improving performance in rocky soils
- Smoother steering under full power with tracked tractors
- Reduces stress on implement frame and 3-point tractor hitch
- Not compatible with pull-type hitch
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
SHANK & POINT OPTIONS
MRD Shanks, Points and Wings (Minimum Residue Disturbance)
Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.
- 1-1/4” Profile
- Austempered ductile, reversible wear bar
- Welded chromium carbide side plates
2” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 51% to 65%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
¾” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 68% to 75%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 68% to 75%
- Fracture: 31% to 48%
No-Till Shank, Points and Wings
The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers up to 50% operation cost saving versus competitors.
- ¾” profile
- High-tensile steel shank
- Austempered or chromium carbide points, wings and wear bar
- Chromium carbide side plates
- Residue remaining: Up to 86%
- Fracture: 55% to 70%
- Replaceable wear parts
2” Hard Surface Point
- Best performance for rocky conditions
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
Specifications
Model | 4830-736F |
Transport Width (ft/m) | 11'5" / 3.5 |
Frame Type | 6" x 6" Double Rank Toolbar |
Number of Shanks | 7 |
Shank Spacing (in/cm) | 36" / 91 |
Working Width (ft/m) | 21' / 6.4 |
Approximate Weight (lb /kg) | 5,700 / 2 585 |
Approximate Weight (lb/kg) | 4,300 / 1 950 |
STANDARD EQUIPMENT | |
Hitch Type | Category III 3-Point with Parking Stand |
Coulter Blades | 22" 1/4" Smooth Coulter Blades, 450 lbs (250 kg) down pressure |
Shank Mount | Spring Reset: 2500 lb Point Load, 20" Trip Height |
Shanks | No-Till (Very Low Surface Disturbance), 1/4" Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors |
Points | 1-3/4" Austempered Ductile Points, 8" Austempered Wings |
Depth Control | Ratchet Jack Adjustable Gauge Wheels |
Gauge Wheels | Two 20.5" x 8", Load Range E |
Transport Locks and Safety | Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
OPTIONAL EQUIPMENT | |
Hitch Type | Drawbar Pull Hitch Includes Four 11L x 15" 8-ply Tires, Duals, One 4-1/4" x 10" and one 4" x 10" Cylinder, Royal Plate Plus® Cylinder Rods, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (less parking stands) |
Shank Mount | Rigid: Shear Bolt Protected, 2,800 lb |
Shank Mount | Pivoting Pathfind'r Spring Reset, 2500 lb |
Shanks | MRD (Minimum Residue Disturbance) 1-1/4" Reversible Austempered Ductile Wear Bar , Chromium Carbide Shank Side Protectors |
Points | 2" Chromium Carbide Points |
Points | 3/4" Chromium Carbide Points (MRD Shanks Only) |
Points | 2" Welded Points (MRD Shanks Only) |
(Recommended for Rocky areas) | |
Shattering Wing | 5" Chromium Carbide Shatter Wings (MRD Shanks Only) |
Shank Cap | Low Disturbance Shank Cap (in lieu of wing) |
Closing Wheels | (2) 4 x 16" smooth closing wheels, adjustable spring tension (limit shank soil blowout) |
Wing Gauge Wheels | Two Extra 20.5" x 8", Load Range E |
Shank Stagger Kit | 6" Offset Between Shanks |
OPERATING INFORMATION | |
Recommended Operating Speed (mph/km/h) | 4 - 7 / 6 - 12 |
Recommended Working Depth | 8" - 16" / 20 - 41 cm |
Recommended Tractor Power Range (mph/kw/h) | 30 - 40 PTO hp per Shank / 22- 30 kW |